// $Id: network.hoc,v 1.205 2012/01/20 02:50:20 samn Exp $
//* Numbers and connectivity params
declare("colW",1,"colH",1,"torus",1)
declare("numcols",colW*colH)
declare("dbgcols",0) // whether to debug columns by making them have the same wiring and inputs
declare("colr",2) // maximal trans-column projection distance; 0 within col; 1 next col etc
declare("colnq","o[5]","lcol",new List())
declare("autotune",0,"useplast",1) //
declare("randsy",-1) // whether to randomize wts (iff non-zero). iff > 0 use uniform distrib, if < 0 use normal
{sprint(tstr,"o[%d]",numcols) declare("col",tstr)}
{sprint(tstr,"o[%d][%d]",colH,colW) declare("gcol",tstr)} // 2D column grid
double div[CTYPi][CTYPi][colr+1]//div[i][j]==# of outputs from type i->j
double wmat[CTYPi][CTYPi][STYPi][colr+1] // wmat[i][j][k]==weight from type i->j for synapse k
double delm[CTYPi][CTYPi]//avg. delay from type i->j
double deld[CTYPi][CTYPi]//delay variance from type i->j
double conv[CTYPi][CTYPi][colr+1]
dosetpmat=name_declared("pmat")==0
{sprint(tstr,"d[%d][%d][%d]",CTYPi,CTYPi,colr+1) declare("pmat",tstr)}
double prumat[CTYPi][CTYPi] //pruning matrix:prumat[i][j] specifies ratio (0-1) of synapses to prune
double sprmat[CTYPi][CTYPi] //sprouting matrix:sprmat[i][j] specifies ratio (0-1) to sprout i->j pathway with
double synloc[CTYPi][CTYPi]//location of synapses
//* swire & related column variables
declare("colside",30) // column diameter in micrometers
declare("swire",3) // whether to use 'spatial' wiring, 2 means use swirecut, 3 means use swirecutfl
declare("checkers",0) // whether to arrange cells in checkerboard pattern
declare("cxinc",3,"cyinc",3,"crad",1)
declare("EEsq",(colside/2)^2,"EIsq",(colside/2)^2,"IEsq",(colside/1)^2,"IIsq",(colside/2)^2) // params for swirecut
double dels[CTYPi][CTYPi]//[STYPi] //stdev of delays
double delv[CTYPi][CTYPi]//variance of delays
double vcond[CTYPi][CTYPi]//[STYPi] //conduction velocities
declare("layerzvar",25) // range of z location of cells in a layer (in micrometers)
declare("colxydist",50) // distance between adjacent columns (x,y)
declare("vlayerz",new Vector(CTYPi))
declare("pseed",4321)
declare("dvcond","d[2]") //intra layer conduction delays
declare("maxsfall",0.001) // max fall-off in prob of connection @ opposite side of column (used by swire)
declare("slambda",colside/3) // spatial length constant for probability of connections, used in swirecut
dvcond[0] = 1 //if presynaptic cell is excit, conduction delay == 1.0 m/s
dvcond[1] = 0.4 //if presynaptic cell is inhib, conduction delay == 0.4 m/s
declare("lambda",30,"hval",0)
declare("mknetnqss",1) // whether COLUMN should make connsnq,cellsnq
declare("DopeRL",0) // whether to use dopamine-RL learning
if(autotune) {
seadsetting_INTF6 = 2
wsetting_INTF6 = 1 // use sywv during sim
} else if(useplast) {
wsetting_INTF6 = 1 // use sywv during sim
seadsetting_INTF6 = 3 // use plasticity
} else {
seadsetting_INTF6 = 2
wsetting_INTF6 = 0
}
if(DopeRL) {
DOPE_INTF6=1
EDOPE_INTF6 = IDOPE_INTF6 = 1
ESTDP_INTF6 = ISTDP_INTF6 = 0
}
declare("wnqstr","") // intracol wiring NQS (single column)
//* prdiv() - print div
proc prdiv () { local ii,jj
for ii=0,CTYPi-1 for jj=0,CTYPi-1 if(div[ii][jj][0]) {
printf("div[%s][%s][0]=%g\n",CTYP.o(ii).s,CTYP.o(jj).s,div[ii][jj][0])
}
}
// %con (con/pre) = %div (div/post)
DEAD_DIV_INTF6=0
declare("jcn",1)
declare("disinhib",0) //iff==1 , turn off inhibition, by setting wmat[I%d][...]==0 in inhiboff()
declare("scale",1) // 2 (takes a lot longer!)
declare("pmatscale",1/scale) // scale for pmat - allows keeping it fixed while changing # of cells in network
declare("wmatscale",1) // scale for wmat - called after setwmat
declare("pmatEE",1,"pmatEI",1,"pmatIE",1,"pmatII",1) // scaling for pmat
declare("onelyr",0) // whether to keep network as a single layer (L2/3)
declare("fc",1)
// declare("EEGain",fc*1,"EIGain",fc*1,"IEGain",fc*1,"IIGain",fc*1)
declare("EEGain",4*15/11,"EIGain",15,"IEGain",4*15/11,"IIGain",4*15/11)
declare("NMAMR",0.1,"EENMGain",1,"EIGainInterC",0.125,"EEGainInterC",0.325*0.5)
batch_flag=declare("dstr",datestr,"setdviPT",NORM)
declare("params","not batch","ofile",output_file)
declare("dvseed",534023) // seed for wiring
dosetcpercol=name_declared("cpercol")==0 // whether to set values in cpercol or use user-supplied values
{sprint(tstr,"d[%d]",CTYPi) declare("cpercol",tstr)} // cells of a specific type per column
declare("vcpercol",new Vector(CTYPi))
declare("E5BNumF",1,"E5RNumF",1) // factors for # of E5 cells
declare("newkmjnums",0) // use #s based on KMJ #s in /u/samn/vcsim/data/Cell_Numbers.xlsx columns R, T, V
declare("cc12vals",0) // use pmat,wmat,del #s from /u/samn/papers/gif/cc12:936_table1.gif
declare("autogain",0) // automatically set EE,EI,IE,II gains based on whether using cc12vals
if(autogain) {
print "WARNING: autogain is on!"
if(cc12vals) {
EEGain = fc*1
EIGain = fc*1
IEGain = fc*1
IIGain = fc*1
} else {
EEGain=4*15/11
EIGain=15
IEGain=4*15/11
IIGain=4*15/11
}
}
sprint(tstr,"d[%d][%d]",CTYPi,CTYPi)
if(!(i=name_declared("delmscale"))) {
declare("delmscale",tstr) // scale delm values by this #
}
if(!i) {
for i=0,CTYPi-1 for j=0,CTYPi-1 delmscale[i][j]=1
}
//* setcpercol - set # of cells per column
proc setcpercol () { local i // (/u/samn/vcsim/notebook.dol_1:24562)(notebook.dol_1:24492)
if(dosetcpercol) { // if user didn't supply values (default), set # of cells of a type per column
if(onelyr) {
cpercol[E2] = 150 * scale
cpercol[I2L] = 13 * scale
cpercol[I2] = 25 * scale
} else if(newkmjnums) {
// based on KMJ #s in /u/samn/vcsim/data/Cell_Numbers.xlsx columns R, T, V
cpercol[E2] = 169 * scale
cpercol[I2] = 48 * scale
cpercol[I2L] = 8 * scale
cpercol[E4] = 83 * scale
cpercol[I4] = 24 * scale
cpercol[I4L] = 4 * scale
cpercol[E5R] = 93 * scale
cpercol[E5B] = 32 * scale
cpercol[I5] = 36 * scale
cpercol[I5L] = 6 * scale
cpercol[E6] = 218 * scale
cpercol[I6] = 62 * scale
cpercol[I6L] = 11 * scale
} else {
cpercol[E2] = 150 * scale
cpercol[E4] = 30 * scale
cpercol[E5B] = int(17 * scale * E5BNumF)
cpercol[E5R] = int(65 * scale * E5RNumF)
cpercol[E6] = 60 * scale
cpercol[I2L] = 13 * scale
cpercol[I2] = 25 * scale
cpercol[I4L] = 14 * scale
cpercol[I4] = 20 * scale
cpercol[I5L] = 13 * scale
cpercol[I5] = 25 * scale
cpercol[I6L] = 13 * scale
cpercol[I6] = 25 * scale
}
}
{vcpercol.resize(CTYPi) vcpercol.fill(0)} // store the values in a vector
for i=0,CTYPi-1 vcpercol.x(i)=cpercol[i]
}
//* setpmat()
proc setpmat () { local pre,po,ii,jj,kk,ct
if(!dosetpmat) return // if pmat setup by user (in notebook), then don't reset its values
for ii=0,CTYPi-1 for jj=0,CTYPi-1 for kk=0,1 pmat[ii][jj][kk]=0
if(cc12vals) {
for case(&ii,E5R,E5B) for case(&jj,E5R,E5B) pmat[ii][jj][0] = 1/11
pmat[E2][E2][0] = (1/4 + 1/10) / 2
pmat[E4][E4][0] = 1 / 5.7
for case(&ct,E5R,E5B) pmat[E2][ct][0] = 1 / 1.8
for case(&ct,E5R,E5B) pmat[ct][E2][0] = 1 / 29
pmat[E4][E2][0] = 1 / 3.6
for case(&ct,E5R,E5B) for case(&jj,I5,I5L) pmat[ct][jj][0] = 1 / 10.4
for case(&ct,I5,I5L) for case(&jj,E5R,E5B) pmat[ct][jj][0] = 1 / 8
//div by 2 are when cat/rat values differ, so take average
for case(&ct,I2,I2L) pmat[E2][ct][0] = (1/5 + 1/4) / 2
for case(&ct,I2,I2L) pmat[ct][E2][0] = (1/6.3 + 1/3.6) / 2
for case(&ct,I4,I4L) pmat[E4][ct][0] = 1 / 5
for case(&ct,I4,I4L) pmat[ct][E4][0] = 1 / 10
for case(&ct,I2,I2L) pmat[E4][ct][0] = 1 / 10
for case(&ct,I4,I4L) pmat[E2][ct][0] = (1/12 + 1/5.3) / 2
for case(&ct,I4,I4L) pmat[ct][E2][0] = (1/2 + 1/3.7) / 2
for case(&ct,I2,I2L) for case(&jj,I2,I2L) pmat[ct][jj][0] = (1/4 + 1) / 2
for case(&ct,I4,I4L) for case(&jj,I4,I4L) pmat[ct][jj][0] = 1/2
for case(&ct,I5,I5L) for case(&jj,I5,I5L) pmat[ct][jj][0] = 1 / 1.7
for case(&ct,I4,I4L) for case(&jj,I2,I2L) pmat[ct][jj][0] = 1 / 2 // 1:1 but keeping @ 50%
// for L6, no data from that paper, so guessing & using KMJ values
pmat[E6][E5B][0]=0.028 * 3
pmat[E6][E5R][0]=0.006 * 3
pmat[E6][E6][0]=0.028 * 3
pmat[E6][I6L][0]=0.51
pmat[E6][I6][0]=0.43
pmat[E6][I6][1]=0.14
pmat[I6L][E2][0]=0.35
pmat[I6L][E5B][0]=0.25
pmat[I6L][E5R][0]=0.25
pmat[I6L][E6][0]=0.35
pmat[I6L][I2][0]=0.53
pmat[I6L][I5][0]=0.53
pmat[I6L][I6L][0]=0.09
pmat[I6L][I6][0]=0.53
pmat[I6][E6][0]=0.44
pmat[I6][I6L][0]=0.34
pmat[I6][I6][0]=0.62
} else {
pmat[E2][E2][0]=0.187
pmat[E2][E2][1]=0//0.14
pmat[E2][E4][0]=0.024
pmat[E2][E5B][0]=0.024
pmat[E2][E5R][0]=0.057
pmat[E2][E6][0]=0
pmat[E2][I2L][0]=0.51
pmat[E2][I2][0]=0.43
pmat[E2][I2][1]=0.14
pmat[E4][E2][0]=0.145
pmat[E4][E4][0]=0.243
pmat[E4][E5B][0]=0.122
pmat[E4][E5R][0]=0.116
pmat[E4][E6][0]=0.032
pmat[E4][I4L][0]=0.51
pmat[E4][I4][0]=0.43
pmat[E4][I4][1]=0.14
pmat[E5B][E2][0]=0.018
pmat[E5B][E2][1]=0.25
pmat[E5B][E2][2]=0.1
pmat[E5B][E4][0]=0.007
pmat[E5B][E5B][0]=0.07
pmat[E5B][E5B][1]=0.25
pmat[E5B][E5B][2]=0.1
pmat[E5B][E5R][0]=0.017
pmat[E5B][E5R][1]=0.25
pmat[E5B][E5R][2]=0.1
pmat[E5B][E6][0]=0.07
pmat[E5B][I2L][1]=0.14
pmat[E5B][I2L][2]=0.07
pmat[E5B][I5L][0]=0.51
pmat[E5B][I5L][1]=0.14
pmat[E5B][I5L][2]=0.07
pmat[E5B][I5][0]=0.43
pmat[E5B][I5][1]=0.14
pmat[E5B][I5][2]=0.07
pmat[E5R][E2][0]=0.022
pmat[E5R][E4][0]=0.007
pmat[E5R][E5B][0]=0.08
pmat[E5R][E5B][1]=0.25
pmat[E5R][E5R][0]=0.191
pmat[E5R][E5R][1]=0.14
pmat[E5R][E6][0]=0.032
pmat[E5R][I5L][0]=0.51
pmat[E5R][I5][0]=0.43
pmat[E5R][I5][1]=0.14
pmat[E6][E2][0]=0
pmat[E6][E4][0]=0
pmat[E6][E5B][0]=0.028
pmat[E6][E5R][0]=0.006
pmat[E6][E6][0]=0.028
pmat[E6][I6L][0]=0.51
pmat[E6][I6][0]=0.43
pmat[E6][I6][1]=0.14
pmat[I2L][E2][0]=0.35
pmat[I2L][E5B][0]=0.5
pmat[I2L][E5R][0]=0.35
pmat[I2L][E6][0]=0.25
pmat[I2L][I2L][0]=0.09
pmat[I2L][I2][0]=0.53
pmat[I2L][I5][0]=0.53
pmat[I2L][I6][0]=0.53
pmat[I2][E2][0]=0.44
pmat[I2][I2L][0]=0.34
pmat[I2][I2][0]=0.62
pmat[I4L][E4][0]=0.35
pmat[I4L][I4L][0]=0.09
pmat[I4L][I4][0]=0.53
pmat[I4][E4][0]=0.44
pmat[I4][I4L][0]=0.34
pmat[I4][I4][0]=0.62
pmat[I5L][E2][0]=0.35
pmat[I5L][E5B][0]=0.35
pmat[I5L][E5R][0]=0.35
pmat[I5L][E6][0]=0.25
pmat[I5L][I2][0]=0.53
pmat[I5L][I5L][0]=0.09
pmat[I5L][I5][0]=0.53
pmat[I5L][I6][0]=0.53
pmat[I5][E5B][0]=0.44
pmat[I5][E5R][0]=0.44
pmat[I5][I5L][0]=0.34
pmat[I5][I5][0]=0.62
pmat[I6L][E2][0]=0.35
pmat[I6L][E5B][0]=0.25
pmat[I6L][E5R][0]=0.25
pmat[I6L][E6][0]=0.35
pmat[I6L][I2][0]=0.53
pmat[I6L][I5][0]=0.53
pmat[I6L][I6L][0]=0.09
pmat[I6L][I6][0]=0.53
pmat[I6][E6][0]=0.44
pmat[I6][I6L][0]=0.34
pmat[I6][I6][0]=0.62
}
}
//* scalepmat(fctr[,EE,EI,IE,II]) - multiply values in pmat by fctr
proc scalepmat () { local fctr,EE,EI,IE,II,from,to,cl
fctr=$1
for from=0,CTYPi-1 for to=0,CTYPi-1 for cl=0,1 pmat[from][to][cl] *= fctr
if(numarg()==5) {
EE=$2 EI=$3 IE=$4 II=$5
for from=0,CTYPi-1 for to=0,CTYPi-1 for cl=0,1 {
if(ice(from)) {
if(ice(to)) {
pmat[from][to][cl] *= II
} else {
pmat[from][to][cl] *= IE
}
} else {
if(ice(to)) {
pmat[from][to][cl] *= EI
} else {
pmat[from][to][cl] *= EE
}
}
}
}
}
//* pmat2nq - return an NQS with info in pmat
obfunc pmat2nq () { local i,j,k localobj nqpmat
nqpmat=new NQS("froms","tos","from","to","cold","pij")
{nqpmat.strdec("froms") nqpmat.strdec("tos")}
for i=0,CTYPi-1 for j=0,CTYPi-1 for k=0,colr if(pmat[i][j][k]) {
nqpmat.append(CTYP.o(i).s,CTYP.o(j).s,i,j,k,pmat[i][j][k])
}
return nqpmat
}
//* nq2pmat - load NQS ($o1) into pmat
proc nq2pmat () { local i,j,k localobj nq,vf,vto,vc,vpij
{nq=$o1 nq.tog("DB") vf=nq.getcol("from") vto=nq.getcol("to") vc=nq.getcol("cold") vpij=nq.getcol("pij")}
for i=0,CTYPi-1 for j=0,CTYPi-1 for k=0,colr pmat[i][j][k]=0
for i=0,vf.size-1 pmat[vf.x(i)][vto.x(i)][vc.x(i)]=vpij.x(i)
print "loaded " , nq , " into pmat"
}
//* synapse locations DEND SOMA AXON
proc setsynloc () { local from,to
for from=0,CTYPi-1 for to=0,CTYPi-1 {
if(ice(from)) {
if(IsLTS(from)) {
synloc[from][to]=DEND // distal [GA2] - from LTS
} else {
synloc[from][to]=SOMA // proximal [GA] - from FS
}
} else {
synloc[from][to]=DEND // E always distal. use AM2,NM2
}
}
}
//* setdelmats -- setup delm,deld
proc setdelmats () { local from,to,ii,jj,ct
if(cc12vals) {
for case(&ii,E5R,E5B) for case(&jj,E5R,E5B) delm[ii][jj] = (1.8+1.5)
for case(&ii,E5R,E5B) for case(&jj,E5R,E5B) deld[ii][jj] = (1.4+0.15)
delm[E2][E2] = (1.86+2.5)/2 + (1.5+1.7)/2
deld[E2][E2] = (0.8+1.3)/2 + (0.3+0.79)/2
delm[E4][E4] = 2 + .6
deld[E4][E4] = 1.5 // unknown
for case(&ct,E5R,E5B) delm[E2][ct] = 2 + 1.4
for case(&ct,E5R,E5B) deld[E2][ct] = 0.9 + 0.3
for case(&ct,E5R,E5B) delm[ct][E2] = 2.6 //unknown
for case(&ct,E5R,E5B) deld[ct][E2] = 1.5 //unknown
delm[E4][E2] = 1.9 + 0.9 // using spiny stellate values, since others close anyway
deld[E4][E2] = 0.4 + 0.24
for case(&ct,E5R,E5B) for case(&jj,I5,I5L) delm[ct][jj] = 0.6 + 1.4
for case(&ct,E5R,E5B) for case(&jj,I5,I5L) deld[ct][jj] = 1 //unknown
for case(&jj,E5R,E5B) delm[I5][jj] = 4.2 + 1.1 - 2 // -2 since FS faster
for case(&jj,E5R,E5B) deld[I5][jj] = 2.8 + 0.2 - 1 // -1 since FS faster
for case(&jj,E5R,E5B) delm[I5L][jj] = 4.2 + 1.1 // LTS slightly slower
for case(&jj,E5R,E5B) deld[I5L][jj] = 2.8 + 0.2
for case(&ct,I2,I2L) delm[E2][ct] = (1.2+2.2)/2 + (1.3+0.95)/2
for case(&ct,I2,I2L) deld[E2][ct] = (.9+1.4)/2 + (.3+.2)/2
delm[I2][E2] = 3.9 + 1.8 -2 // -2 since FS faster
deld[I2][E2] = 1.5 + 0.8 -1 // -1 since FS faster
delm[I2L][E2] = 3.9 + 1.8
deld[I2L][E2] = 1.5 + 0.8
for case(&ct,I4,I4L) delm[E4][ct] = 0.7 + 1.2
for case(&ct,I4,I4L) deld[E4][ct] = 1 //unknown
delm[I4][E4] = 3.7 + 1.2 -2 // -2 since FS faster
deld[I4][E4] = 0.3
delm[I4L][E4] = 3.7 + 1.2
deld[I4L][E4] = 0.3
for case(&ct,I2,I2L) delm[E4][ct] = 0.72 + 0.6
for case(&ct,I2,I2L) deld[E4][ct] = 0.04 + 0.1
for case(&ct,I4,I4L) delm[E2][ct] = 0.85 + 1.0
for case(&ct,I4,I4L) deld[E2][ct] = 0.2 + 0.2
delm[I4][E2] = (2.8+3+3.5+4.4)/4 + (1.1+1.0+0.8+1.9)/4 -2 // -2 since FS faster
deld[I4][E2] = (1.6 + 1.1)/2 -0.5 // -0.5 since FS faster
delm[I4L][E2] = (2.8+3+3.5+4.4)/4 + (1.1+1.0+0.8+1.9)/4
deld[I4L][E2] = (1.6 + 1.1)/2
for case(&jj,I2,I2L) delm[I2][jj] = (2+2.4+2.3+3.9)/4 + (0.7+1.5+1.0+0.8)/4 -2 // -2 since FS faster
for case(&jj,I2,I2L) deld[I2][jj] = (1.9+0.8)/2 -0.5 // -0.5 since FS faster
for case(&jj,I2,I2L) delm[I2L][jj] = (2+2.4+2.3+3.9)/4 + (0.7+1.5+1.0+0.8)/4
for case(&jj,I2,I2L) deld[I2L][jj] = (1.9+0.8)/2
for case(&jj,I4,I4L) delm[I4][jj] = (2.7+2.9)/2 + (0.8+1.1)/2 -2 // -2 since FS faster
for case(&jj,I4,I4L) deld[I4][jj] = 1.35 -0.5 // -0.5 since FS faster
for case(&jj,I4,I4L) delm[I4L][jj] = (2.7+2.9)/2 + (0.8+1.1)/2
for case(&jj,I4,I4L) deld[I4L][jj] = 1.35
//rest unknown
for case(&jj,I5,I5L) delm[I5][jj] = (2.7+2.9)/2 + (0.8+1.1)/2 -2 // -2 since FS faster
for case(&jj,I5,I5L) deld[I5][jj] = 1.35 -0.5 // -0.5 since FS faster
for case(&jj,I5,I5L) delm[I5L][jj] = (2.7+2.9)/2 + (0.8+1.1)/2
for case(&jj,I5,I5L) deld[I5L][jj] = 1.35
for case(&jj,I2,I2L) delm[I4][jj] = (2.7+2.9)/2 + (0.8+1.1)/2 -2 // -2 since FS faster
for case(&jj,I2,I2L) deld[I4][jj] = 1.35 -0.5 // -0.5 since FS faster
for case(&jj,I2,I2L) delm[I4L][jj] = (2.7+2.9)/2 + (0.8+1.1)/2
for case(&jj,I2,I2L) deld[I4L][jj] = 1.35
// for L6, no data from that paper, so guessing & using KMJ values
delm[E6][E5B]= 3.8
deld[E6][E5B]= 1.6
delm[E6][E5R]= 3.8
deld[E6][E5R]= 1.6
delm[E6][E6]= 3.8
deld[E6][E6]= 1.6
delm[E6][I6L]= 2.825
deld[E6][I6L]= 1.4
delm[E6][I6]= 2.825
deld[E6][I6]= 1.4
for case(&ct,E2,E5B,E5R,E6) {
delm[I6L][ct]= 3.9 + 1.8
deld[I6L][ct]= 1.5 + 0.8
}
for case(&ct,I2,I5,I6L,I6) {
delm[I6L][ct]= (2+2.4+2.3+3.9)/4 + (0.7+1.5+1.0+0.8)/4
deld[I6L][ct]= (1.9+0.8)/2
}
delm[I6][E6]= 3.9 + 1.8 -2 // -2 since FS faster
deld[I6][E6]= 1.5 + 0.8 -1 // -1 since FS faster
for case(&ct,I6L,I6) {
delm[I6][ct]= (2+2.4+2.3+3.9)/4 + (0.7+1.5+1.0+0.8)/4 -2 // -2 since FS faster
deld[I6][ct]= (1.9+0.8)/2 -0.5 // -0.5 since FS faster
}
} else {
for from=0,CTYPi-1 for to=0,CTYPi-1 {
if(synloc[from][to]==DEND) {
delm[from][to]=4 * delmscale[from][to]
deld[from][to]=1
} else {
delm[from][to]=2.0 * delmscale[from][to]
deld[from][to]=0.2
}
}
}
}
//* weight params
//** delay all 2+/-0.02 within column for now
proc setwmat () { local ii,jj,from,to,sy,gn,c,fc,ct
for from=0,CTYPi-1 for to=0,CTYPi-1 for sy=0,STYPi-1 for c=0,colr wmat[from][to][sy][c]=0
if(cc12vals) {
for case(&ii,E5R,E5B) for case(&jj,E5R,E5B) wmat[ii][jj][AM2][0] = 1.7
wmat[E2][E2][AM2][0] = (1.7 + 1.4) / 2
wmat[E4][E4][AM2][0] = 1.1
for case(&ct,E5R,E5B) wmat[E2][ct][AM2][0] = 1.4
for case(&ct,E5R,E5B) wmat[ct][E2][AM2][0] = 0.3
wmat[E4][E2][AM2][0] = (1.1+3.3+5.9)/3
for case(&ct,E5R,E5B) for case(&jj,I5,I5L) wmat[ct][jj][AM2][0] = 0.9
for case(&ct,E5R,E5B) wmat[I5][ct][GA][0] = 1.23
for case(&ct,E5R,E5B) wmat[I5L][ct][GA2][0] = 1.23
//div by 2 are when cat/rat values differ, so take average
for case(&ct,I2,I2L) wmat[E2][ct][AM2][0] = (1.9+3.1)/2
wmat[I2][E2][GA][0] = 0.65
wmat[I2L][E2][GA2][0] = 0.65
for case(&ct,I4,I4L) wmat[E4][ct][AM2][0] = 3.7
wmat[I4][E4][GA][0] = 0.85
wmat[I4L][E4][GA2][0] = 0.85
for case(&ct,I2,I2L) wmat[E4][ct][AM2][0] = 1.2
for case(&ct,I4,I4L) wmat[E2][ct][AM2][0] = 1.3
wmat[I4][E2][GA][0] = (1.75 + (.43+1)/2)/2
wmat[I4L][E2][GA2][0] = (1.75 + (.43+1)/2)/2
for case(&ct,I2,I2L) wmat[I2][ct][GA][0] = (2 + .7 + .8 + 1.3)/4
for case(&ct,I2,I2L) wmat[I2L][ct][GA2][0] = (2 + .7 + .8 + 1.3)/4
for case(&ct,I4,I4L) wmat[I4][ct][GA][0] = (.4+2.7)/2
for case(&ct,I4,I4L) wmat[I4L][ct][GA2][0] = (.4+2.7)/2
for case(&ct,I5,I5L) wmat[I5][ct][GA][0] = (.4+2.7)/2
for case(&ct,I5,I5L) wmat[I5L][ct][GA2][0] = (.4+2.7)/2
for case(&ct,I2,I2L) wmat[I4][ct][GA][0] = (.4+2.7)/2
for case(&ct,I2,I2L) wmat[I4L][ct][GA2][0] = (.4+2.7)/2
// for L6, no data from that paper, so guessing & using KMJ values -- appear similar range here
wmat[E6][E5B][AM2][0]=0.53
wmat[E6][E5R][AM2][0]=0.08
wmat[E6][E6][AM2][0]=0.53
wmat[E6][I6L][AM2][0]=0.23
wmat[E6][I6][AM2][0]=0.23
wmat[I6L][E2][GA2][0]=0.83
wmat[I6L][E5B][GA2][0]=0.83
wmat[I6L][E5R][GA2][0]=0.83
wmat[I6L][E6][GA2][0]=0.83
wmat[I6L][I2][GA2][0]=0.83
wmat[I6L][I5][GA2][0]=0.83
wmat[I6L][I6L][GA2][0]=1.5
wmat[I6L][I6][GA2][0]=1.5
wmat[I6][E6][GA][0]=1.5
wmat[I6][I6L][GA][0]=1.5
wmat[I6][I6][GA][0]=1.5
} else {
fc = 1
//*** neocx -> neocx
wmat[E2][E2][AM2][0]=0.78
wmat[E2][E2][AM2][1]=0.47 * EEGainInterC
wmat[E2][E4][AM2][0]=0.36
wmat[E2][E5B][AM2][0]=0.36 * fc
wmat[E2][E5R][AM2][0]=0.93 * fc
wmat[E2][E6][AM2][0]=0
wmat[E2][I2L][AM2][0]=0.23
wmat[E2][I2][AM2][0] = 0.23
wmat[E2][I2][AM2][1] = 1.5 * EIGainInterC
wmat[E4][E2][AM2][0]=0.58 * fc
wmat[E4][E4][AM2][0]=0.95
wmat[E4][E5B][AM2][0]=1.01
wmat[E4][E5R][AM2][0]=0.54
wmat[E4][E6][AM2][0]=2.27
wmat[E4][I4L][AM2][0]=0.23
wmat[E4][I4][AM2][0] = 0.23
wmat[E4][I4][AM2][1] = 1.5 * EIGainInterC
wmat[E5B][E2][AM2][0]=0.26
wmat[E5B][E2][AM2][1]=0.47 * EEGainInterC
wmat[E5B][E2][AM2][2]=0.47 * EEGainInterC
wmat[E5B][E4][AM2][0]=0.17
wmat[E5B][E5B][AM2][0]=0.71
wmat[E5B][E5B][AM2][1]=0.47 * EEGainInterC
wmat[E5B][E5B][AM2][2]=0.47 * EEGainInterC
wmat[E5B][E5R][AM2][0]=0.24
wmat[E5B][E5R][AM2][1]=0.47 * EEGainInterC
wmat[E5B][E5R][AM2][2]=0.47 * EEGainInterC
wmat[E5B][E6][AM2][0]=0.49
wmat[E5B][I2L][AM2][1]=1.5 * EIGainInterC
wmat[E5B][I2L][AM2][2]=1.5 * EIGainInterC
wmat[E5B][I5L][AM2][0]=0.23
wmat[E5B][I5L][AM2][1]=1.5 * EIGainInterC
wmat[E5B][I5L][AM2][2]=1.5 * EIGainInterC
wmat[E5B][I5][AM2][0]=0.23
wmat[E5B][I5][AM2][1]=1.5 * EIGainInterC
wmat[E5B][I5][AM2][2]=1.5 * EIGainInterC
wmat[E5R][E2][AM2][0]=0.67
wmat[E5R][E4][AM2][0]=0.48
wmat[E5R][E5B][AM2][0]=0.88
wmat[E5R][E5B][AM2][1]=0.47 * EEGainInterC
wmat[E5R][E5R][AM2][0]=0.66
wmat[E5R][E5R][AM2][1]=0.47 * EEGainInterC
wmat[E5R][E6][AM2][0]=0.28 * fc
wmat[E5R][I5L][AM2][0]=0.23
wmat[E5R][I5][AM2][0]=0.23
wmat[E5R][I5][AM2][1]=1.5 * EIGainInterC
wmat[E6][E2][AM2][0]=0
wmat[E6][E4][AM2][0]=0
wmat[E6][E5B][AM2][0]=0.53
wmat[E6][E5R][AM2][0]=0.08
wmat[E6][E6][AM2][0]=0.53
wmat[E6][I6L][AM2][0]=0.23
wmat[E6][I6][AM2][0]=0.23
wmat[E6][I6][AM2][1]=1.5 * EIGainInterC
wmat[I2L][E2][GA2][0]=0.83
wmat[I2L][E5B][GA2][0]=0.83
wmat[I2L][E5R][GA2][0]=0.83
wmat[I2L][E6][GA2][0]=0.83
wmat[I2L][I2L][GA2][0]=1.5
wmat[I2L][I2][GA2][0]=1.5
wmat[I2L][I5][GA2][0]=0.83
wmat[I2L][I6][GA2][0]=0.83
wmat[I2][E2][GA][0]=1.5
wmat[I2][I2L][GA][0]=1.5
wmat[I2][I2][GA][0]=1.5
wmat[I4L][E4][GA2][0]=0.83
wmat[I4L][I4L][GA2][0]=1.5
wmat[I4L][I4][GA2][0]=1.5
wmat[I4][E4][GA][0]=1.5
wmat[I4][I4L][GA][0]=1.5
wmat[I4][I4][GA][0]=1.5
wmat[I5L][E2][GA2][0]=0.83
wmat[I5L][E5B][GA2][0]=0.83
wmat[I5L][E5R][GA2][0]=0.83
wmat[I5L][E6][GA2][0]=0.83
wmat[I5L][I2][GA2][0]=0.83
wmat[I5L][I5L][GA2][0]=1.5
wmat[I5L][I5][GA2][0]=1.5
wmat[I5L][I6][GA2][0]=0.83
wmat[I5][E5B][GA][0]=1.5
wmat[I5][E5R][GA][0]=1.5
wmat[I5][I5L][GA][0]=1.5
wmat[I5][I5][GA][0]=1.5
wmat[I6L][E2][GA2][0]=0.83
wmat[I6L][E5B][GA2][0]=0.83
wmat[I6L][E5R][GA2][0]=0.83
wmat[I6L][E6][GA2][0]=0.83
wmat[I6L][I2][GA2][0]=0.83
wmat[I6L][I5][GA2][0]=0.83
wmat[I6L][I6L][GA2][0]=1.5
wmat[I6L][I6][GA2][0]=1.5
wmat[I6][E6][GA][0]=1.5
wmat[I6][I6L][GA][0]=1.5
wmat[I6][I6][GA][0]=1.5
}
//set NMDA weights
for from=0,CTYPi-1 for to=0,CTYPi-1 for c=0,colr wmat[from][to][NM2][c]=NMAMR*wmat[from][to][AM2][c]
//gain control
for from=0,CTYPi-1 for to=0,CTYPi-1 for sy=AM,GA2 for c=0,colr if(wmat[from][to][sy][c] > 0) {
if(ice(from)) {
if(ice(to)) {
gn = IIGain
} else {
gn = IEGain
}
if(IsLTS(from) && !IsLTS(to)) gn *= 0.5
} else {
if(ice(to)) {
gn = EIGain
if(IsLTS(to)) gn *= 0.5
} else {
gn = EEGain
if(sy==NM || sy==NM2) gn *= EENMGain // E->E NMDA gain
}
}
wmat[from][to][sy][c] *= gn
}
}
//* scalewmat(fctr) - multiply values in wmat by fctr
proc scalewmat () { local fctr,from,to,sy,c
fctr=$1
for from=0,CTYPi-1 for to=0,CTYPi-1 {
for sy=0,STYPi-1 for c=0,colr-1 wmat[from][to][sy][c] *= fctr
}
}
// %con (con/pre) = %div (div/post)
//* prune using values in prumat
proc pruc () { local i,j
for i=0,CTYPi-1 for j=0,CTYPi-1{
if(div[i][j][0] && numc[i] && numc[j] && prumat[i][j]){
printf("Warning: pruning random %.2f%% of %s->%s syns\n",prumat[i][j]*100,CTYP.o(i).s,CTYP.o(j).s)
for ixt(i) XO.prune(prumat[i][j],j)
}
}
}
//* get sprouting value assuming 0% sprouting == 50% pruning
func getspr () { local pr
pr = $1
return ((0.5-pr)/.5)*100
}
//* turn off pruning
proc pruoff () { local i,j
for i=0,CTYPi-1 for j=0,CTYPi-1 prumat[i][j]=0
for i=0,allcells-1 INTF6[i].prune(0)
}
//* set all entries in pruning matrix to $1
proc setpru () { local from,to,val
val=$1
pruoff() // first turn off pruning
for from=0,CTYPi-1 for to=0,CTYPi-1 prumat[from][to]=val
}
//* print prumat
proc prumatpr () { local i,j
for i=0,CTYPi-1 { for j=0,CTYPi-1{
printf("%.2f ",prumat[i][j])
}
printf("\n")
}
}
//* clear sprmat entries to 0
proc clrsprmat () { local i,j
for i=0,CTYPi for j=0,CTYPi sprmat[i][j]=0
}
//* unkill/prune all cells
proc unkp () {
for i=0,allcells-1 {
ce.o(i).flag("dead",0)
ce.o(i).prune(0)
}
}
//* kill cells who's ids are in $o1
proc dokill () { local id
for vtr(&id,$o1) ce.o(id).flag("dead",1)
}
//* getkillids - gets ids of cells to kill in $o1 but excludes cells that are stim'ed
//$1=cell type to kill,$2=prct of cells to kill,$o3=vq stim nqs,$4=out vector of kill ids,$5=rnd seed
func getkillids () { local killcnt,i,j,ct,prct localobj vq,vkid,rd
ct=$1 prct=$2 vq=$o3 vkid=$o4 killcnt=int(prct*numc[ct]) vkid.resize(0) j=0 i=ix[ct]
rd=new Random() rd.ACG($5)
while(j<killcnt){
i=rd.discunif(ix[ct],ixe[ct])
if(!vq.v[0].contains(i)){
j+=1
vkid.append(i)
}
i+=1
}
return killcnt
}
//* read .net file
strdef netfile
{sp = new NQS() cp = new NQS()}
//* CREATE CELLS
// %con (con/pre) = %div (div/post)
n=ty=id=0
//** gethublims(col,hubtype,hubfactor,numhubs,mode)
// get a matrix of size CTYPi X CTYPi, specifying div with mat.x(hubtype,othertype)
// and conv with mat.x(othertype,hubtype)
// hubtype = type of hub. hubfactor = desired ratio of hub div/conv vs non-hub div/conv
// numhubs = # of hubs. col = COLUMN for which to set hubs.
// mode == 0 <-- hub div(conv) is set to hubfactor * original div(conv)
// mode == 1 <-- hub div(conv) is set so that final hub div = hubfactor * final non_hub div (same for conv)
// formula is based on: m / ((N-H*m) / (C-H)) = F , and then solving for m
// m = div for the hubs, F = desired ratio of final hub div to final non-hub div
// N = # of synapses (links), C = total # of postsynaptic cells (including hubs) , H = # of hubs
// similarly done for conv , but replace N with appropriate values
// (/u/samn/intfcol/notebook.dol_1:21933)
obfunc gethublims () { local ct,mode,from,to,lim,nc,nhubs,fctr localobj col,mat
{col=$o1 ct=$2 fctr=$3 nhubs=$4 mode=$5 mat=new Matrix(CTYPi,CTYPi)}
for to=0,CTYPi-1 if(col.numc[to] && col.div[ct][to]) {
{nc=col.numc[to] if(ct==to)nc-=1} // deduct for self-link
if(mode==0) {
lim = int( 0.5 + col.div[ct][to]*fctr )
} else {
lim = int( 0.5 + col.div[ct][to]*col.numc[ct]*fctr/(col.numc[ct]-nhubs+fctr*nhubs) )
}
mat.x(ct,to) = MINxy(lim, nc) // at most div to all postsynaptic cells
}
for from=0,CTYPi-1 if(col.numc[from] && col.div[from][ct]) {
{nc=col.numc[from] if(ct==from)nc-=1} // deduct for self-link
if(mode==0) {
lim = int( 0.5 + col.conv[from][ct]*fctr )
} else {
lim = int( 0.5 + col.div[from][ct]*col.numc[from]*fctr/(col.numc[ct]-nhubs+fctr*nhubs) )
}
mat.x(from,ct) = MAXxy(MINxy(lim, nc),1) // at most conv from all presynaptic cells, but at least 1
}
return mat
}
//** addhubs(column,cell-type,numhubs,scaling factor,skipI[,seed,allowz,hubmode,verbose])
// add hubs to the network by stealing wires from other neurons
// $o1 == column
// $2 == cell type of hub
// $3 == number of hubs to add
// $4 == scaling factor (should be > 1.0) for conv,div of hub
// $5 == skip div/conv of I cells
// $6 == seed - optional
// $7 == allowz - whether to allow pulling all links from/to another cell
// $8 == hubmode - which mode to use for gethublims (see above)
// $9 == verbose - optional
// function returns a Vector containing the ids of the cells selected as hubs (within column ids)
obfunc addhubs () { local a,ct,fctr,nhubs,idx,jdx,lseed,hubid,szorig,cursz,preid,poid,lim,skipI,to,from,vrb,changed,allowz,hmode\
localobj col,ce,vin,vout,nq,vd,vc,vdd,vdt,vddt,vpicked,vhubid,vw1,vw2,vsyn,vprob,vsynt,vtmp,vdsz,vcsz,mhlim
col=$o1 ct=$2 nhubs=$3 fctr=$4 skipI=$5
if(numarg()>5) lseed=$6 else lseed=1234
if(numarg()>6) allowz=$7 else allowz=1
if(numarg()>7) hmode=$8 else hmode=0
if(numarg()>8) vrb=$9 else vrb=0
{ce=col.ce hashseed_stats(lseed,lseed,lseed)}
a=allocvecs(vin,vout,vd,vc,vdd,vdt,vddt,vpicked,vw1,vw2,vsyn,vprob,vsynt,vtmp,vdsz,vcsz)
vrsz(col.allcells,vin,vout,vd,vc,vdd,vdt,vddt,vpicked,vw1,vw2,vsyn,vprob,vsynt,vdsz,vcsz,vtmp)
mhlim=gethublims(col,ct,fctr,nhubs,hmode)
//vin,vout = input/output markers. vd,vc = div/conv.
//vdd div/conv delays, vdt div/conv temp. vddt=div/conv delay temp
//vpicked=which cells already picked as hubs
vhubid=new Vector()
{vhubid.indgen(col.ix[ct],col.ixe[ct],1) vhubid.shuffle() vhubid.resize(nhubs)}
if(vrb) vlk(vhubid)
for idx=0,vhubid.size-1 vpicked.x(vhubid.x(idx))=1
for idx=0,vhubid.size-1 { hubid=vhubid.x(idx)
if(vrb) printf("hub%d id = %d\n",idx+1,hubid)
{ce.o(hubid).getdvi(vd,vdd,vw1,vw2,vprob,vsyn) ce.o(hubid).getconv(vc)}//IDs of post/presynaptic cells
{ce.o(hubid).getconv(1.2,vcsz) vdsz.resize(CTYPi) vdsz.fill(0)}//counts of post/pre types
for jdx=0,vd.size-1 vdsz.x(ce.o(vd.x(jdx)).type)+=1
{vout.fill(0) vin.fill(0)} //init as 0
for jdx=0,vd.size-1 vout.x(vd.x(jdx))=1 //mark current postsynaptic cells
for jdx=0,vc.size-1 vin.x(vc.x(jdx))=1 //mark current presynaptic cells
for to=0,CTYPi-1 if(col.numc[to] && col.div[ct][to] && (!skipI || !ice(to))) {
cursz=szorig=vdsz.x(to) // update divergence
if(vrb) print "\torig div -> " , CTYP.o(to).s, " = " , szorig
{lim=mhlim.x(ct,to) changed=1}
while(cursz<lim && changed==1) { changed=0
for(preid=col.ix[ct];preid<=col.ixe[ct] && cursz<lim;preid+=1) {// pick same presynaptic type
if(vpicked.x(preid)) continue //dont take from other hubs
ce.o(preid).getdvi(vdt,vddt,vw1,vw2,vprob,vsynt)
vtmp.fill(0)
for jdx=0,vdt.size-1 vtmp.x(ce.o(vdt.x(jdx)).type)+=1
if(!allowz && vtmp.x(to)<=1)continue//dont want to turn div of another cell to 0
for jdx=0,vdt.size-1 { poid=vdt.x(jdx) // go thru postsynaptic cells looking for target type
if(ce.o(poid).type==to && poid!=hubid && vout.x(poid)==0) { cursz+=1
{vd.append(poid) vdd.append(vddt.x(jdx)) vsyn.append(vsynt.x(jdx))}
{vdt.remove(jdx) vddt.remove(jdx) vsynt.remove(jdx)}
ce.o(preid).setdvi(vdt,vddt,vsynt,1) // update presynaptic cell
vout.x(poid)=changed=1 // this cell synapses on poid
break
}
}
}
}
if(vrb) print "\tnew div -> " , CTYP.o(to).s, " = " , cursz
}
ce.o(hubid).setdvi(vd,vdd,vsyn,1) // update hub dvi
for from=0,CTYPi-1 if(col.numc[from] && col.div[from][ct] && (!skipI || !ice(from))) {
cursz=szorig=vcsz.x(from) // update convergence
{lim=mhlim.x(from,ct) changed=1}
if(vrb) print "\torig conv <- ", CTYP.o(from).s, " = " , szorig
while(cursz<lim && changed==1) { changed=0
for(preid=col.ix[from];preid<=col.ixe[from]&&cursz<lim;preid+=1) {
if(preid==hubid || vin.x(preid)) continue // don't make self or double-connects
ce.o(preid).getdvi(vdt,vddt,vw1,vw2,vprob,vsynt)
for jdx=0,vdt.size-1{
poid = vdt.x(jdx)
if(vpicked.x(poid)) continue // don't take wires from other hubs
if(ce.o(poid).type==ct){ ce.o(poid).getconv(1.2,vtmp)
if(allowz || vtmp.x(from)>1) { // make sure not to remove all inputs of a type to a cell
vdt.x( jdx ) = hubid // reassign input to hub
ce.o(preid).setdvi(vdt,vddt,vsynt,1) // reset presynaptic cell's div
vin.x( preid ) = changed = 1 // mark input
cursz += 1
break
}
}
}
}
}
if(vrb) print "\tnew conv <- " , CTYP.o(from).s, " = " , cursz
}
}
ce.o(0).finishdvir()
{dealloc(a) return vhubid}
}
//* mkcolnqs - make an nqs with current pmat,wmat,delm,deld info for use by a COLUMN for wiring
// "dist" represents distance between columns: dist==0 for intra-COLUMN setup, dist>0 for INTER-COLUMN setup
proc mkcolnqs () { local from,to,sy,idx,d localobj froms,tos,sys
if(numarg()>0)idx=$1 else idx=0
{nqsdel(colnq[idx]) colnq[idx]=new NQS("froms","tos","sys","from","to","sy","w","pij","delm","deld","loc","dist")}
colnq[idx].strdec("froms","tos","sys")
for from=0,CTYPi-1 { froms=CTYP.o(from)
for to=0,CTYPi-1 { tos=CTYP.o(to)
for d=0,colr if(pmat[from][to][d]>0) for sy=0,STYPi-1 if(wmat[from][to][sy][d]>0) { sys=STYP.o(sy)
colnq[idx].append(froms.s,tos.s,sys.s,from,to,sy,wmat[from][to][sy][d],pmat[from][to][d],delm[from][to],deld[from][to],synloc[from][to],d)
}
}
}
}
//* mkcols - make the COLUMNs
proc mkcols () { local id,x,y,seed localobj nq
id=0
for y=0,colH-1 for x=0,colW-1 {
if(dbgcols)seed=dvseed else seed=(id+1)*dvseed
lcol.append(gcol[y][x]=new COLUMN(id,vcpercol,colnq,seed,x,y,setdviPT,mknetnqss,1))
col[id]=gcol[y][x]
col[id].verbose=verbose_INTF6
//if(strlen(wnqstr)>0) { // strlen is an undefined function in this particular model
// nq=new NQS(wnqstr)
// col[id].wirenq(nq)
// nqsdel(nq)
//} else if(swire>0) {
if(swire>0) {
col[id].setcellpos(vlayerz,layerzvar,pseed*(id+1),colside)
if(swire==1) {
col[id].swire(col[id].wseed,maxsfall)
} else if(swire==3) {
swirecutfl(col[id],EEsq,EIsq,IEsq,IIsq,col[id].wseed,slambda) // uses intf6::floc for speedup
}
} else col[id].wire(col[id].wseed)
id+=1
}
}
//* wirecols - setup inter-COLUMN connectivity with NetCon
proc wirecols () { local x1,y1,x2,y2,dx,dy,maxd,d localobj fromc,toc
if(numarg()>0) d=$1 else d=colr
if(torus) { // wraparound
//alternate coordinates: ( -colW+x , -colH+y )
//alternate system: -5 -4 -3 -2 -1
//original system: 0 1 2 3 4
//layed out as a line: -5 -4 -3 -2 -1 0 1 2 3 4
//only need to compare in normal system, and 1 alternate coordinate vs original (and vice versa)
for y1=0,colH-1 for x1=0,colW-1 for y2=0,colH-1 for x2=0,colW-1 {
if(y1==y2 && x1==x2) continue // skip self-self
dx=MINxy(abs(x1-x2), MINxy(abs((-colW+x1)-x2), abs(x1-(-colW+x2))) )
dy=MINxy(abs(y1-y2), MINxy(abs((-colH+y1)-y2), abs(y1-(-colH+y2))) )
if((maxd=MAXxy(dx,dy)) > d) continue // skip too far
gcol[y1][x1].wire2col(gcol[y2][x2],colnq,maxd,ncl) // unidirectional wiring
}
} else { // no wrap-around
for y1=0,colH-1 for x1=0,colW-1 for y2=0,colH-1 for x2=0,colW-1 {
if(y1==y2 && x1==x2) continue // skip self-self
if((maxd=MAXxy(abs(x1-x2),abs(y1-y2))) > d) continue // skip too far
gcol[y1][x1].wire2col(gcol[y2][x2],colnq,maxd,ncl) // unidirectional wiring
}
}
}
//* intercoloff - turn off all weights between COLUMNs
proc intercoloff () { local i localobj xo
for ltr(xo,ncl) if(isojt(xo.pre,col.ce.o(0)) && isojt(xo.syn,col.ce.o(0))) {
for i=0,6 xo.weight(i)=0
}
}
//* intercolmul(from,to,sy,w)
proc intercolsyw () { local from,to,sy,w localobj xo
from=$1 to=$2 sy=$3 w=$4
for ltr(xo,ncl) if(isojt(xo.pre,col.ce.o(0)) && isojt(xo.syn,col.ce.o(0))) {
if(xo.pre.type==from && xo.syn.type==to) xo.weight(sy)=w
}
}
//* conprob
func conprob () { // calculate connection probability using global slambda and hval
if ($1<=slambda) return hval else return hval*exp(1-$1/slambda) // probability of connect
}
//** swirecutfl (col,EEsq,EIsq,IEsq,IIsq[,seed,slambda]) - spatial wiring: wires the column using pmat and cell positions
// (wiring probability effected by distance btwn cells)
// seed is random # seed
// slambda specifies length-constant for spatially-dependent fall-off in wiring probability
// at one slambda away, probability of connect is value in pmat
proc swirecutfl () { local x,y,z,ii,jj,a,del,prid,poid,prty,poty,dv,lseed,h,prob,slambda,dsq,dist,slambdasq,\
EEsq,EIsq,IEsq,IIsq,ic1,ic2,pdx,n,nn,maxd,rsz\
localobj col,ce,vidx,vdel,vdist,vwt1,vwt2,vtmp,vpre,opr,opo,st,rdm,vprob,oq,ol,mmaxd
oq=new NQS("id1","id2","del","dist","wt1","wt2","dist0","prob") oq.verbose=0 ol=new List() mmaxd=new Matrix(2,2)
a=allocvecs(vidx,vdel,vtmp,vdist,vwt1,vwt2,vprob,vpre) z=0
{ol.append(vpre) ol.append(vidx) ol.append(vdel) ol.append(vdist) ol.append(vwt1) ol.append(vwt2)}
col=$o1 ce=col.ce EEsq=$2 EIsq=$3 IEsq=$4 IIsq=$5
if (argtype(6)==0) lseed=$6 else lseed=1234
if(numarg()>6) slambda=$7 else slambda=10
if(slambda<=0){
printf("swirecut WARN: invalid slambda=%g, setting slambda to %g\n",colside/3)
slambda=colside/3
}
slambdasq = slambda^2 // using squared distance
vrsz(1e4,vidx,vdel,vdist,vtmp,vpre)
rdm=new Random() rdm.ACG(lseed) // initdivrnd(lseed)//initialize random # generator
rdm.uniform(0,1) rsz=ce.count^2 vprob.resize(rsz) vprob.setrand(rdm) pdx=0
{mmaxd.x(0,0)=sqrt(EEsq) mmaxd.x(0,1)=sqrt(EIsq) mmaxd.x(1,0)=sqrt(IEsq) mmaxd.x(1,1)=sqrt(IIsq)}
// Create the connectivity NQS table.
if(col.mknetnqss) {nqsdel(col.connsnq) col.connsnq=new NQS("id1","id2","del","dist","wt1","wt2")}
for y=0,ce.count-1 { opr=ce.o(y)
vrsz(0,vidx,vdel,vdist,vwt1,vwt2)
prid=opr.id prty=opr.type ic1=ice(opr.type)
for poty=0,CTYPi-1 if (col.numc[poty]!=0 && (h=hval=col.pmat[prty][poty])>0) {
ic2 = ice(poty)
oq.clear()
if ((n=opr.floc(opr.xloc,opr.yloc,1e9,oq.getcol("id2"),oq.getcol("dist"),mmaxd.x(ic1,ic2),poty))==0) {
if(verbose) printf("swirecutfl: No possibilities for connections found from %d\n",opr.id)
} else {
oq.getcol("dist0").copy(oq.getcol("dist"))
oq.pad(n)
oq.getcol("dist0").apply("conprob") // turn distances into probabilities
if (pdx+n>=rsz) { rdm.uniform(0,1) vprob.setrand(rdm) pdx=0 }
oq.getcol("prob").copy(vprob,pdx,pdx+n-1) // pick out some random probabilities to compare to
pdx+=n
oq.calc("<dist0>.sub(<prob>)")
if ((nn=oq.select("dist0",">",0,"id2","!=",prid))==0) { // looks for dist_prob > prob
if(verbose) printf("swirecutfl: No connections found from %d out of %d assayed\n",opr.id,n)
} else {
oq.cpout()
//oq.fill("id1",prid)
rdm.uniform(col.delm[prty][poty]-col.deld[prty][poty],col.delm[prty][poty]+col.deld[prty][poty])
oq.getcol("del").setrand(rdm)
if (col.syty1[prty][poty]>=0) oq.getcol("wt1").fill(col.wmat[prty][poty][col.syty1[prty][poty]]) else oq.getcol("wt1").fill(0)
if (col.syty2[prty][poty]>=0) oq.getcol("wt2").fill(col.wmat[prty][poty][col.syty2[prty][poty]]) else oq.getcol("wt2").fill(0)
{vwt1.append(oq.getcol("wt1")) vwt2.append(oq.getcol("wt2"))}
{vidx.append(oq.getcol("id2")) vdel.append(oq.getcol("del"))}
vdist.resize(vdist.size+nn)
if(synloc[prty][poty]==DEND) vdist.fill(1,vdist.size-nn,vdist.size-1) else vdist.fill(0,vdist.size-nn,vdist.size-1)
}
}
}
if(vidx.size>0) {
if(wsetting_INTF6==1) opr.setdvi(vidx,vdel,vdist,1,vwt1,vwt2) else opr.setdvi(vidx,vdel,vdist,1)
if(col.mknetnqss){vpre.resize(vidx.size) vpre.fill(prid) col.connsnq.append(ol)}
// for ii=0,vidx.size-1 col.connsnq.append(prid,vidx.x(ii),vdel.x(ii),vdist.x(ii),vwt1.x(ii),vwt2.x(ii))
}
}
col.ce.o(0).finishdvir()
dealloc(a)
nqsdel(oq)
if(verbose) printf("\n")
}
//* randsywts(col) - randomize synaptic weights
proc randsywts () { local w,i,j,k,sy,sead,a localobj xo,vidx,vw1,vw2,col,ce,rdm
col=$o1 ce=col.ce
if(numarg()>1) sead=$2 else sead=1234
rdm=new Random() rdm.ACG(sead)
a=allocvecs(vidx,vw1,vw2)
for ltr(xo,ce) {
{vrsz(xo.getdvi(vidx),vw1,vw2) vw1.fill(0) vw2.fill(0)}
for vtr(&i,vidx,&j) {
if(synloc[xo.type][ce.o(i).type]==DEND) {
if(ice(xo.type)) sy=GA2 else sy=AM2
} else {
if(ice(xo.type)) sy=GA else sy=AM
}
w = wmat[xo.type][ce.o(i).type][sy+0][0]
if(randsy > 0) {
vw1.x(j)=MAXxy(0,rdm.uniform((1-randsy)*w,(1+randsy)*w))
} else vw1.x(j)=MAXxy(0,rdm.normal(w,w/(-randsy)))
if((w=wmat[xo.type][ce.o(i).type][sy+1][0])>0)vw2.x(j)=vw1.x(j)*NMAMR// only NM2 for wt2
}
xo.setsywv(vw1,vw2)
}
dealloc(a)
}
//* drcelllocs - draw location of cells
proc drcelllocs () { local i,gvt,ty
gvt=gvmarkflag
{gvmarkflag=1 col[CDX].cellsnq.marksym="O"}
if(numarg()>0) {
if(col[CDX].cellsnq.select("ty",$1)) col[CDX].cellsnq.gr("yloc","xloc",0,1,3)
} else for i=0,1 if(col[CDX].cellsnq.select("ice",i)) col[CDX].cellsnq.gr("yloc","xloc",0,i+2,3)
gvmarkflag=gvt
}
//* drcelldiv(cellid) - draw outputs from a cell
proc drcelldiv () { local id1,id2,x1,y1,x2,y2,ic1,ic2,clr1,clr2,gvt localobj cnq,nq
gvt=gvmarkflag gvmarkflag=1
cnq=col[CDX].connsnq
nq=col[CDX].cellsnq
id1=$1 nq.verbose=0
nq.select(-1,"id",id1)
x1=nq.v[5].x(nq.ind.x(0))
y1=nq.v[6].x(nq.ind.x(0))
ic1=nq.v[4].x(nq.ind.x(0))
if(ic1) clr1=3 else clr1=2
nq.select("id",id1)
nq.gr("yloc","xloc",0,clr1,15)
cnq.select(-1,"id1",id1)
cnq.verbose=0
for vtr(&i,cnq.ind) {
id2 = cnq.v[1].x(i)
if(nq.select("id",id2)) {
x2=nq.fetch("xloc")
y2=nq.fetch("yloc")
ic2=nq.fetch("ice")
if(ic2) clr2=3 else clr2=2
nq.gr("yloc","xloc",0,clr2,8)
drline(x1,y1,x2,y2,g,clr1,7)
}
}
cnq.verbose=nq.verbose=1
gvmarkflag=gvt
}
//* drcellconv(cellid) - draw inputs to a cell
proc drcellconv () { local id1,id2,x1,y1,x2,y2,ic1,ic2,clr1,clr2,gvt localobj cnq,nq
gvt=gvmarkflag gvmarkflag=1
cnq=col[CDX].connsnq
nq=col[CDX].cellsnq
id2=$1 nq.verbose=0
nq.select(-1,"id",id2)
x2=nq.v[5].x(nq.ind.x(0))
y2=nq.v[6].x(nq.ind.x(0))
ic2=nq.v[4].x(nq.ind.x(0))
if(ic2) clr2=3 else clr2=2
nq.select("id",id2)
nq.gr("yloc","xloc",0,clr2,15)
cnq.select(-1,"id2",id2)
cnq.verbose=0
for vtr(&i,cnq.ind) {
id1 = cnq.v[0].x(i)
if(nq.select("id",id1)) {
x1=nq.fetch("xloc")
y1=nq.fetch("yloc")
ic1=nq.fetch("ice")
if(ic1) clr1=3 else clr1=2
nq.gr("yloc","xloc",0,clr1,8)
drline(x1,y1,x2,y2,g,clr1,7)
}
}
cnq.verbose=nq.verbose=1
gvmarkflag=gvt
}
//* mkwgnq(col) - return nqs with weight info
obfunc mkwgnq () { local a,i,j,id1,id2,wg,ic,ty1,ty2,wt1,wt2,del,dist\
localobj mycel,vwt1,vwt2,myv,myv1,myv2,myv3,myv4,myv5,myv6,wgnq,col
a=allocvecs(vwt1,vwt2,myv,myv1,myv2,myv3,myv4,myv5,myv6) col=$o1
{nqsdel(wgnq) wgnq=new NQS("id1","id2","wg","ice","ty1","ty2","wt1","wt2","del","dist")}
for i=0,col.allcells-1 {
mycel=col.ce.o(i)
mycel.getdvi(myv,myv1,myv2,myv3,myv4,myv5,myv6)
id1=i
ic=ice(mycel.type)
ty1=mycel.type
{vrsz(mycel.getdvi,vwt1,vwt2) vwt1.fill(0) vwt2.fill(0)}
if(wsetting_INTF6==1) mycel.getsywv(vwt1,vwt2)
for j=0,myv6.size-1 {
id2=myv.x(j)
ty2=col.ce.o(id2).type
wg = myv6.x(j)
wt1 = wg * vwt1.x(j)
if(ic) wt2 = vwt2.x(j) else wt2 = wg * vwt2.x(j)
del = myv1.x(j)
dist = myv5.x(j)
wgnq.append(id1,id2,wg,ic,ty1,ty2,wt1,wt2,del,dist)
}
}
dealloc(a)
return wgnq
}
//* function calls to setup network
//** # of cells per column
setcpercol() //new numbers (10aug30)
//** setup pmat
if(name_declared("nqpmat")==2) { // read pmat from NQS if available, else set to default
if(nqpmat!=nil) nq2pmat(nqpmat) else setpmat()
} else setpmat()
scalepmat(pmatscale,pmatEE,pmatEI,pmatIE,pmatII)
//** setup synapse locations,delays,wmat
setsynloc()
setdelmats()
setwmat() // new KMJ version
if(wmatscale!=1) scalewmat(wmatscale)
scrsz=50*1e3
double scr[scrsz]
//** make cells, columns, wire columns
mkcolnqs()
mkcols()
wirecols(1)
if(randsy) randsywts(col,randsy)