TITLE simple NMDA receptors
COMMENT
-----------------------------------------------------------------------------
Essentially the same as /examples/nrniv/netcon/ampa.mod in the NEURON
distribution - i.e. Alain Destexhe's simple AMPA model - but with
different binding and unbinding rates and with a magnesium block.
Modified by Andrew Davison, The Babraham Institute, May 2000
Simple model for glutamate AMPA receptors
=========================================
- FIRST-ORDER KINETICS, FIT TO WHOLE-CELL RECORDINGS
Whole-cell recorded postsynaptic currents mediated by AMPA/Kainate
receptors (Xiang et al., J. Neurophysiol. 71: 2552-2556, 1994) were used
to estimate the parameters of the present model; the fit was performed
using a simplex algorithm (see Destexhe et al., J. Computational Neurosci.
1: 195-230, 1994).
- SHORT PULSES OF TRANSMITTER (0.3 ms, 0.5 mM)
The simplified model was obtained from a detailed synaptic model that
included the release of transmitter in adjacent terminals, its lateral
diffusion and uptake, and its binding on postsynaptic receptors (Destexhe
and Sejnowski, 1995). Short pulses of transmitter with first-order
kinetics were found to be the best fast alternative to represent the more
detailed models.
- ANALYTIC EXPRESSION
The first-order model can be solved analytically, leading to a very fast
mechanism for simulating synapses, since no differential equation must be
solved (see references below).
References
Destexhe, A., Mainen, Z.F. and Sejnowski, T.J. An efficient method for
computing synaptic conductances based on a kinetic model of receptor binding
Neural Computation 6: 10-14, 1994.
Destexhe, A., Mainen, Z.F. and Sejnowski, T.J. Synthesis of models for
excitable membranes, synaptic transmission and neuromodulation using a
common kinetic formalism, Journal of Computational Neuroscience 1:
195-230, 1994.
Orignal file by:
Kiki Sidiropoulou
Adjusted Cdur = 1 and Beta= 0.01 for better nmda spikes
PROCEDURE rate: FROM -140 TO 80 WITH 1000
Modified by Penny under the instruction of M.L.Hines on Oct 03, 2017
Change gmax
-----------------------------------------------------------------------------
ENDCOMMENT
NEURON {
POINT_PROCESS NMDAe
RANGE g, Alpha, Beta, Erev, gmax, Cdur, iNMDA, ica_nmda, nmda_ca_fraction
RANGE Cdur_init, Cdur_factor, weight
USEION ca READ cai, cao WRITE ica VALENCE 2
NONSPECIFIC_CURRENT iNMDA
RANGE mg, Cmax, eta, alpha
}
UNITS {
(nA) = (nanoamp)
(mV) = (millivolt)
(uS) = (microsiemens)
(mM) = (milli/liter)
FARADAY = (faraday) (coulomb)
R = (k-mole) (joule/degC)
}
PARAMETER {
Cmax = 1 (mM) : max transmitter concentration
Alpha = 4 (/ms /mM) : forward (binding) rate (4)
Beta = 0.01 (/ms) : backward (unbinding) rate
Erev = 15 (mV) : reversal potential
mg = 1 (mM) : external magnesium concentration
eta = 0.28 (/mV)
alpha = 0.072 (/mV)
gmax = 1 (uS)
nmda_ca_fraction = 0.175 : (5% of the current is from Ca at 1mM extracellular Ca concentration)
: previously nmda_ca_fraction = 0.7, from NMDA is 5-10 times more permeable to Ca++ than Na+ or K+, Ascher and Nowak, 1988;
Cdur_init = 50 (ms) : transmitter duration (rising phase)
Cdur_factor = 100 (ms) : transmitter duration (rising phase)
weight = 0.25
}
ASSIGNED {
v (mV) : postsynaptic voltage
iNMDA (nA) : current = g*(v - e)
g (uS) : conductance
Rinf : steady state channels open
Rtau (ms) : time constant of channel binding
synon
B : magnesium block
ica
Cdur
cai
cao
celsius (degC)
}
STATE {Ron Roff}
INITIAL {
Rinf = Cmax*Alpha / (Cmax*Alpha + Beta)
Rtau = 1 / (Cmax*Alpha + Beta)
synon = 0
}
BREAKPOINT {
SOLVE release METHOD cnexp
B = mgblock(v)
g = (Ron + Roff)* gmax * B
iNMDA = g*(v - Erev)
:ica_nmda = g*nmda_ca_fraction*ghk(v, ca_nmdai, ca_nmdao)
:iNMDA = iNMDA - ica_nmda
ica = nmda_ca_fraction*iNMDA
iNMDA = (1 - nmda_ca_fraction)*iNMDA
Cdur = Cdur_init + weight*Cdur_factor
}
DERIVATIVE release {
Ron' = (synon*Rinf - Ron)/Rtau
Roff' = -Beta*Roff
}
FUNCTION mgblock(v(mV)) {
TABLE
DEPEND mg
FROM -140 TO 80 WITH 1000
: from Jahr & Stevens
mgblock = 1 / (1 + mg * eta * exp(-alpha * v) ) :was 0.062, changed to 0.072 to get a better voltage-dependence of NMDA currents, july 2008, kiki
}
FUNCTION ghk(v (mV), ci (mM), co (mM)) (.001 coul/cm3) {
LOCAL z, eci, eco
z = (1e-3)*2*FARADAY*v/(R*(celsius+273.15))
if(z == 0) {
z = z+1e-6
}
eco = co*(z)/(exp(z)-1)
eci = ci*(-z)/(exp(-z)-1)
ghk = (1e-3)*2*FARADAY*(eci-eco)
}
: following supports both saturation from single input and
: summation from multiple inputs
: if spike occurs during CDur then new off time is t + CDur
: ie. transmitter concatenates but does not summate
: Note: automatic initialization of all reference args to 0 except first
NET_RECEIVE(dummy, on, nspike, r0, t0 (ms)) {
: flag is an implicit argument of NET_RECEIVE and normally 0
if (flag == 0) { : a spike, so turn on if not already in a Cdur pulse
nspike = nspike + 1
if (!on) {
r0 = r0*exp(-Beta*(t - t0))
t0 = t
on = 1
synon = synon + weight
state_discontinuity(Ron, Ron + r0)
state_discontinuity(Roff, Roff - r0)
}
: come again in Cdur with flag = current value of nspike
net_send(Cdur, nspike)
}
if (flag == nspike) { : if this associated with last spike then turn off
r0 = weight*Rinf + (r0 - weight*Rinf)*exp(-(t - t0)/Rtau)
t0 = t
synon = synon - weight
state_discontinuity(Ron, Ron - r0)
state_discontinuity(Roff, Roff + r0)
on = 0
}
}