//distal Poisson GLUT + Periodic GABAa
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/*======================================================================================================================*/
/*distribute synapses over the distal dendrites*/
/*=========================================*/
/////////////////////////////////////////////
Glucon=60 //uM glutamate concentration
cell_area = 0
segnum = 1
totnseg = 0
forsec distaldend {
for i = 1, nseg {
node_pos = (2*i -1)/(2*nseg)
cell_area = cell_area + area(node_pos)
totnseg = totnseg +1
}
}
fprint("cell area = %f um^2\n" , cell_area)
fprint("total number of segments in cell = %d\n" , totnseg)
nsec = 0
forall {
nsec = nsec+1
}
fprint("number of sections = %d\n", nsec)
//gamma=0.025 //nS, single channel conductance of NMDA synapses
//AMPA_weight=100e-6 //uS
//GABA_weight=1000e-6 //uS
GLUprefreq_per = 3 //Hz
//GABAprefreq_per = 40
//events = 6000
//nsyn_start_GLUT = 300/10
nsyn_start_GABA = events/GABAprefreq_per
pathnum = 1
GLUprefreq = GLUprefreq_per*nsyn_start_GLUT
GABAprefreq = GABAprefreq_per*nsyn_start_GABA
numGLUT=GLUprefreq*tstop*0.001
print "GLUprefreq_per = ", GLUprefreq_per
print "GABAprefreq_per = ", GABAprefreq_per
densityGLUT = cell_area/nsyn_start_GLUT
densityGABA = cell_area/nsyn_start_GABA
fprint("densityGLUT = %f (um^2)/synapse\n", densityGLUT)
fprint("densityGABA = %f (um^2)/synapse\n\n\n", densityGABA)
objref AMPAsyn[nsyn_start_GLUT], NMDAsyn[nsyn_start_GLUT], ns_GLUT[nsyn_start_GLUT]
objref GABAsyn[nsyn_start_GABA]
objref nonint_nsynvec
nonint_nsynvec = new Vector(1) //this is cause the floor function can only used for vectors!
/*initializations for GLUT synapses*/
leftover_area = 0
nsyn_used_GLUT = 0
nsyn_left_GLUT = nsyn_start_GLUT
segnum_cell = 0
forsec distaldend {
//fprint("SECTION %s\n", secname())
//fprint("number of segments in section = %d\n", nseg)
//fprint("number of GLUT synapses left to distribute = %d\n", nsyn_left_GLUT)
segnum_sec = 1 //initialization
nsynGLUTsec = 0 //initialization
while(nseg >= segnum_sec && nsyn_left_GLUT>0) {
//fprint("segment number %d\n", segnum_sec)
//fprint("we are on segment # %d of a total of %d segments in the cell\n", segnum_cell+1, totnseg)
node_pos = (2*segnum_sec-1)/(2*nseg)
area_seg = area(node_pos) //microns^2, returns the area of the segment which contains node point
//fprint("area of segment %d = %f um^2\n", segnum_sec, area_seg)
//fprint("leftover area = %f um^2\n", leftover_area)
area_avail = leftover_area + area_seg
nonint_nsyn = area_avail/densityGLUT
nonint_nsynvec.x[0] = nonint_nsyn
nonint_nsynvec.floor()
nsyn_allocate = nonint_nsynvec.x[0]
leftover_area = (nonint_nsyn - nsyn_allocate)*densityGLUT
nsyn_allocated = 0 //initialization
while (nsyn_allocate>nsyn_allocated && nsyn_left_GLUT>0) {
AMPAsyn[nsyn_used_GLUT] = new Exp2Syn(node_pos) //put a synapse in the center of each segment
AMPAsyn[nsyn_used_GLUT].tau1 = .5 //ms
AMPAsyn[nsyn_used_GLUT].tau2 = 2 //ms
AMPAsyn[nsyn_used_GLUT].e = 0 //mV
NMDAsyn[nsyn_used_GLUT] = new NMDA_TESTED(node_pos)
NMDAsyn[nsyn_used_GLUT].nchan = 1 // (pS) set number of channels (maximum conductance)
NMDAsyn[nsyn_used_GLUT].gamma = gamma // (ns) single channel conductance
NMDAsyn[nsyn_used_GLUT].del = 0 //delay of Neurotransmitter pulse
NMDAsyn[nsyn_used_GLUT].dur = 10 //duration of Neurotransmitter pulse
NMDAsyn[nsyn_used_GLUT].conc = 0 // uM
ns_GLUT[nsyn_used_GLUT] = new NetStim(node_pos)
ns_GLUT[nsyn_used_GLUT].interval = 1/GLUprefreq_per*1000
ns_GLUT[nsyn_used_GLUT].start = StimStart//0
ns_GLUT[nsyn_used_GLUT].noise = 1
ns_GLUT[nsyn_used_GLUT].number = numGLUT
nsyn_used_GLUT = nsyn_used_GLUT + 1
nsyn_left_GLUT = nsyn_start_GLUT - nsyn_used_GLUT
nsyn_allocated = nsyn_allocated +1
nsynGLUTsec = nsynGLUTsec + 1
}
//fprint("number of GLUT synapses allocated for this segment = %d\n", nsyn_allocated)
segnum_sec = segnum_sec + 1
segnum_cell = segnum_cell + 1
}
//fprint("number of GLUT synapses used for section %s = %d\n", secname(), nsynGLUTsec)
}
//fprint("went through %d segments out of total %d segments in the cell\n", segnum_cell, totnseg)
fprint("total number GLUT synapses used in distal dendrites = %d out of %d GLUT synapses available\n\n\n\n\n\n", nsyn_used_GLUT, nsyn_start_GLUT)
fprint("=====================================================================================================================================\n")
fprint("=====================================================================================================================================\n")
fprint("=====================================================================================================================================\n\n\n\n\n\n")
/*initializations for GABA synapses*/
leftover_area = 0
nsyn_used_GABA = 0
nsyn_left_GABA = nsyn_start_GABA
segnum_cell = 0
forsec distaldend {
//fprint("SECTION %s\n", secname())
//fprint("number of segments in section = %d\n", nseg)
//fprint("number of GABA synapses left to distribute = %d\n", nsyn_left_GABA)
segnum_sec = 1 //initialization
nsynGABAsec = 0 //initialization
while(nseg >= segnum_sec && nsyn_left_GABA>0) {
//fprint("segment number %d\n", segnum_sec)
//fprint("we are on segment # %d of a total of %d segments in the cell\n", segnum_cell+1, totnseg)
node_pos = (2*segnum_sec - 1)/(2*nseg)
area_seg = area(node_pos) //microns^2, returns the area of the segment which contains node point
//fprint("area of segment %d = %f um^2\n", segnum_sec, area_seg)
//fprint("leftover area = %f um^2\n", leftover_area)
area_avail = leftover_area + area_seg
nonint_nsyn = area_avail/densityGABA
nonint_nsynvec.x[0] = nonint_nsyn
nonint_nsynvec.floor()
nsyn_allocate = nonint_nsynvec.x[0]
leftover_area = (nonint_nsyn - nsyn_allocate)*densityGABA
nsyn_allocated = 0 //initialization
while (nsyn_allocate>nsyn_allocated && nsyn_left_GABA>0) {
GABAsyn[nsyn_used_GABA] = new Exp2Syn(node_pos) //put a synapse in the center of each segment
GABAsyn[nsyn_used_GABA].tau1= amp1 //.5 //ms
GABAsyn[nsyn_used_GABA].tau2 = amp2 //7 //ms
GABAsyn[nsyn_used_GABA].e = -70 //mV
nsyn_used_GABA = nsyn_used_GABA + 1
nsyn_left_GABA = nsyn_start_GABA - nsyn_used_GABA
nsyn_allocated = nsyn_allocated +1
nsynGABAsec = nsynGABAsec + 1
}
//fprint("number of GABA synapses allocated for this segment = %d\n", nsyn_allocated)
segnum_sec = segnum_sec + 1
segnum_cell = segnum_cell + 1
}
//fprint("number of GABA synapses used for section %s = %d\n", secname(), nsynGABAsec)
}
//fprint("went through %d segments out of total %d segments in the cell\n", segnum_cell, totnseg)
fprint("total number GABA synapses used in distal dendrites= %d out of %d GABA synapses available\n\n\n", nsyn_used_GABA, nsyn_start_GABA)
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/*======================================================================================================================================================*/
/*create the spike time vectors for all the synapses*/
/*==================================================*/
//////////////////////////////////////////////////////
nsynGLUT = nsyn_used_GLUT
nsynGABA = nsyn_used_GABA
strdef basename, aftername, extension, filename
objectvar gabafile
basename = "Codes for periodic inhibition/GABAprespikes_delta2_"
aftername = "_"
extension = "dat"
sprint(filename, "%s%g%s%d%s%d.%s", basename, delta, aftername, GABAprefreq_per, aftername, events, extension)
//////////////////gradually turn on oscillatory inhibition/////////////////////////////////////////////
/*
basename = "Codes for periodic inhibition/GABAprespikes_dis15Hz_gradpercycle_delta2_30-5_events1000-2000"
extension = "dat"
sprint(filename, "%s.%s", basename, extension)
*/
////////////////////////////////////////////////////////////////////////////////////////////////////////
gabafile = new File(filename)
gabafile.ropen()
nsynvec_GABA = nsynGABA //number of time vectors = number of synapses
nspiketimes_GABA = gabafile.scanvar() //number of spike times to be read from the data file
/*generate a vector of random numbers which represents the scrambled synapse indices*/
objref s
s = new Random()
objref randindvec_GABA
randindvec_GABA = new Vector(nspiketimes_GABA)
for m = 0, nspiketimes_GABA-1 {
randindvec_GABA.x[m] = s.uniform(0, nsynvec_GABA) //generates noninteger random numbers and puts them in randindvec
}
randindvec_GABA.floor() //floors the elements to integers between 1 and nsynvec
/*create vectors to hold the spike times for each synapse*/
objref syntimevec_GABA[nsynvec_GABA]
for i = 0, nsynvec_GABA-1 {
syntimevec_GABA[i] = new Vector()
}
/*fill in the time vectors with randomly distributed spike times*/
for n = 0, nspiketimes_GABA-1 {
t_0 = gabafile.scanvar() //extract a spike time
randind = randindvec_GABA.x[n] //pick synapse from random index vector to assign this time
syntimevec_GABA[randind].resize(syntimevec_GABA[randind].size()+1)
syntimevec_GABA[randind].x[syntimevec_GABA[randind].size()-1] = t_0
}
/////////////////////////////////////////////////////
/*save spike times for GABA synapses*/
/////////////////////////////////////////////////////
/*
objref savdata_spike
objref spikematrix
savdata_spike = new File()
spikematrix = new Matrix()
spikematrix.resize(nsynGABA, 400) // for 0-8s
for p=0, nsynGABA-1 {
for q=0, syntimevec_GABA[p].size()-1 {
spikematrix.x[p][q]=syntimevec_GABA[p].x(q)
}
}
savdata_spike.wopen("Outputdata/spiketime_per_20Hz_delta5.dat")
spikematrix.fprint(savdata_spike, " %g")
savdata_spike.close()
*/
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/*create netcon objects and load syntimevecs into the event queue for the netcon objects*//////////////////////////////////////////////////////////////////
//////////////////////////////////////////////////////////////////////////////////////////
objectvar ncAMPA[nsynGLUT], null
objectvar ncNMDA[nsynGLUT]
objectvar ncGABA[nsynGABA], fih_GABA
proc loadqueue_GABA() {local ii, jj
for jj = 0, nsynGABA-1 {
//print "initializing events for GABA synapse ", jj
for ii = 0, syntimevec_GABA[jj].size()-1 {
ncGABA[jj].event(syntimevec_GABA[jj].x[ii])
}
}
}
//////////////////////////////////////////////////////////////////////////////////
for k = 0, nsynGLUT-1 {
ncAMPA[k] = new NetCon(ns_GLUT[k], AMPAsyn[k])
ncAMPA[k].weight = AMPA_weight //uS
ncNMDA[k] = new NetCon(ns_GLUT[k], NMDAsyn[k])
ncNMDA[k].weight = (Glucon) //uM 25e-6
}
for k = 0, nsynGABA-1 {
ncGABA[k] = new NetCon(null, GABAsyn[k])
ncGABA[k].weight = GABA_weight //uS
}
fih_GABA = new FInitializeHandler("loadqueue_GABA()")
/////////////////////////////////////////////////////////////////////////////////////////////////////////
/* total conductance of each kind receptor*/
/////////////////////////////////////////////////////////////////////////////////////////////////////////
//fprint("frequency of distal gaba synapses = %d", GABAprefreq_per)
fprint("%s", filename)
//fprint("%s", filename1)
fprint("number of basal ex synapses = %d", nsyn_start_GLUT1)
fprint("number of distal ex synapses = %d", nsyn_start_GLUT)
fprint("delta=%g", delta)
fprint("events=%g", events)
fprint("tau1=%g", amp1)
fprint("tau2=%g", amp2)
fprint("gca_proximal=%g", gca_proximal)
fprint("gnmda=%g", gamma)
fprint("g_gaba=%g", GABA_weight)
fprint("ghbar=%g", ghbar)
fprint("zetat=%g", zetat)
fprint("htau=%g", tau)