/*----------------------------------------------------------------------------

	VOLTAGE-CLAMP SIMULATIONS OF RE CELLS
	=====================================

	- passive and structural parameters estimated from SimFit
	- electrode with adjustable series resistance
	- simulations at 24 degC
	- special run procedure for calculating the peak current
	- calcium diffusion
	- Q10=2.5


	  ** voltage-clamp in dissociated RE cell with 8 compartment **


  For more details, see:

  Destexhe, A., Contreras, D., Steriade, M., Sejnowski, T.J. and Huguenard,
  J.R.  In vivo, in vitro and computational analysis of dendritic calcium
  currents in thalamic reticular neurons.  J. Neurosci. 16: 169-185, 1996.

  See also:

  http://www.cnl.salk.edu/~alain
  http://cns.fmed.ulaval.ca

----------------------------------------------------------------------------*/



//----------------------------------------------------------------------------
//  load and define general graphical procedures
//----------------------------------------------------------------------------

// xopen("$(NEURONHOME)/lib/hoc/stdrun.hoc")
load_file("nrngui.hoc")

objectvar g[20]			// max 20 graphs
ngraph = 0

proc addgraph() { local ii	// define subroutine to add a new graph
				// addgraph("variable", minvalue, maxvalue)
	ngraph = ngraph+1
	ii = ngraph-1
	g[ii] = new Graph()
	g[ii].size(tstart,tstop,$2,$3)
	g[ii].xaxis()
	g[ii].yaxis()
	g[ii].addvar($s1,1,0)
	g[ii].save_name("graphList[0].")
	g[ii].exec_menu("Keep Lines")
	graphList[0].append(g[ii])
}

if(ismenu==0) {
  nrnmainmenu()			// create main menu
  nrncontrolmenu()		// create control menu
}




//----------------------------------------------------------------------------
//  transient time
//----------------------------------------------------------------------------

trans = 1000

print " "
print ">> Transient time of ",trans," ms"
print " "





//----------------------------------------------------------------------------
//  create multi-compartment geometry and insert currents
//----------------------------------------------------------------------------

xopen("cells/reD.geo")	// read geometry file

corrD = 1			// dendritic surface correction

forall { 			// insert passive current everywhere
	insert pas
	g_pas = 5e-5 * corrD	// (from simfit)
	e_pas = -72.843		// (from simfit)
	cm = 1 * corrD		// (from simfit)
	Ra = 260		// (from simfit)
	L = L
}

soma {
	g_pas = 5e-5		// (from simfit)
	cm = 1			// (from simfit)
}


forall {
	insert it2		// T-current everywhere
	cai = 2.4e-4 
	cao = 2 
	eca = 120 
	shift_it2 = 0		// no shift of ITs
	gcabar_it2 = corrD * 0.0002
	qm_it2 = 2.5		// low q10
	qh_it2 = 2.5

	insert cad		// calcium diffusion everywhere
	depth_cad = corrD	// NEED TO BE RESCALED
	kt_cad = 0		// no pump
	kd_cad = 1e-4
	taur_cad = 5
	cainf_cad = 2.4e-4	
}



xopen("locD.oc")	// load procedure for localizing T-current


localize (0.000045, 0.000045) 	// initial distribution of T-current



	




//----------------------------------------------------------------------------
//  insert electrode in the soma
//----------------------------------------------------------------------------

load_file("El.oc")		// Electrode with series resistance


access soma
objectvar El			// insert electrode
El = new Electrode()
electrodes_present=1

//
// VOLTAGE-CLAMP MODE
//

	forall { g_pas = 0 }		// remove passive current everywhere

	soma El.vc.loc(0.5)		// put electrode in voltage-clamp mode
	El.vc.dur[0] = trans-20
	El.vc.dur[1] = 10
	El.vc.dur[2] = 1000
	El.vc.amp[0] = -110
	El.vc.amp[1] = -110
	El.vc.amp[2] = -30
	El.vc.rs = 5	 		// series resistance
					// 49.79 megohm from simfit



//----------------------------------------------------------------------------
//  setup simulation parameters
//----------------------------------------------------------------------------

Dt = 0.2
npoints = 2000

objectvar Sim			// create vector of simulation points
Sim = new Vector(npoints)

dt = 0.1			// must be submultiple of Dt
tstart = trans-100
tstop = trans + npoints * Dt
runStopAt = tstop
steps_per_ms = 1/Dt
celsius = 24
v_init = -70





//----------------------------------------------------------------------------
//  procedures for voltage-clamp protocol
//----------------------------------------------------------------------------

proc run2() {				// new run procedure
	run()
	peak_current = Sim.min()
	print "Peak current = ",peak_current
}


proc init() {				// initialization procedure
	finitialize(v_init)
	fcurrent()
	index = 0			// add definition of an index
	peak_current = 0		// define peak current
}


proc step() {local i			// advance-one-step (Dt) procedure
	Plot()
	if(t >= trans) {
		Sim.set(index,El.vc.i)	// memorize data only after trans
		index = index + 1
	}
	for i=1,nstep_steprun {
		advance()
	}
}

vmin = -110				// values of protocol
vmax = -40
vstep = 5

proc run_vc() {				// general procedure for v-clamp
	for(vhold=vmin; vhold<vmax+vstep; vhold=vhold+vstep) {
		El.vc.amp[0] = vhold
		run2()
	}
}

proc make_VCpanel() {			// make panel
	xpanel("VC")
	xpvalue("Start holding potential",&vmin)
	xpvalue("End holding potential",&vmax)
	xpvalue("Step potential",&vstep)
	xbutton("Start protocol","run_vc()")
	xpanel()
}

make_VCpanel()



//----------------------------------------------------------------------------
//  add graphs
//----------------------------------------------------------------------------

addgraph("El.vc.i",-0.16,0.0001)
addgraph("soma.v(0.5)",-120,0)
addgraph("dend1[3].v(0.5)",-120,0)  	// for dissociated cell
//addgraph("dend3[6].v(0.5)",-120,0)	// for intact cell